Performing Automatic Dust Erasure Processing; Automatic Dust Erasure Processing In The Main Window - Canon 1236B001 - EOS Digital Rebel XTi Camera SLR Instruction Manual

Performing Automatic Dust Erasure Processing

The Dust Delete Data that is appended to images shot with the camera
that can attach this data, can be used to automatically erase dust spots.
The dust-erased image becomes a dust-erased image when saved as a
separate image (p.29).
In the main window, select an image appended with
1
Dust Delete Data.
Select the [Tools] menu
2
The copy stamp window appears.
When the image has redrawn itself, click the [Apply
3
Dust Delete Data] button.
Dust spots are erased in a single operation.
You can check the erased dust spots one by one by pressing the
<F> key. (Press the <B> key to return to the previous dust spot.)
Also, you can cancel only the displayed dust-erased spot by
pressing the <delete> key.
Click the [OK] button to return to the main window.
4
The [ ] mark (p.81) is displayed on an image from which dust
spots have been erased.
[Start Stamp tool].
Save as a separate image.
5
The image becomes a dust-erased image by saving as a
separate image (p.29).
Even if you have saved by performing "Adding a Recipe and Save"
(p.28), a dust-erased image is not created, merely information about
dust erasure processing is saved to an image. You must save the
image as a separate image (p.29).
A dust-erased image does not change, merely dust erasure
information is saved to the image. For that reason, you can return
an image to its original condition at any time (p.75).
Check dust-erased images in the copy stamp window. You cannot
check them in other windows.
In automatic dust erasure processing, dust spots are erased
based on information relating to dust saved in the Dust Delete
Data. However, there may be cases where you will not be able to
erase dust spots depending on the type of dust. If this occurs,
erase those dust spots using the repair function
stamp function (p.75).
To switch between full screen display/normal screen display,
press the < > + <F11> keys.
You can also press the <esc> key to return the full screen display
to the normal screen display.

Automatic Dust Erasure Processing in the Main Window

In the main window, you can also automatically erase dust spots in an
image appended with Dust Delete Data.
Select an image appended with Dust Delete Data,
and then select the [Adjustment] menu [Apply Dust
Delete Data].
Dust spots in the selected image are erased in a single
operation.
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced
3
Image Editing
and Printing
Processing
4
Large Numbers
(p.73) or the copy
of Images
5
Editing JPEG
Images
Reference
Index
72