Epson Equity I Product Support Bulletin page 58

Some Equity I and Equity II computers have trouble running
certain application
because they have an early version of ROM BIOS. This diskette
contains a patch
problem (by patching the ROM) or tells you that your computer
does not need it.
Follow the instructions below to install the patch if you have an
Equity I or an Equity II,
Installing the
At the MS-DOS system prompt, type:
One of the
Resident portion
This indicates that the patch was necessary and has been
properly installed
see this message, you need to install this patch every
time you load MS-DOS. You may want to include ROMPATCH in
your AUTOEXEC.BAT
every time you boot your Equity.
for instructions
ROMPATCH version
This indicates
installed since you last booted your Equity.
No need to install ROMPATCH version 1.0
This indicates that your Equity's ROM BIOS does not need
the patch and you can disregard this patch and these
instructions.
If your system does need the patch, remember to install it each
time you boot your Equity or include it in your AUTOEXEC.BAT
file.
ROMPATCH INSTALLATION
programs
named ROMPATCH.COM
Patch
following messages
of ROMPATCH
in the
file, so
on creating
1.0 already
that ROMPATCH.COM
INSTRUCTIONS
(Lotus 1-2-3 Version
which
ROMPATCH
appears:
version 1.0
lowest available
it is installed
(See your MS-DOS manual
an AUTOEXEC.BAT
installed
has already
2, for
either corrects
and press
loaded
memory. If
automatically
file.)
been properly
Page 9 of 9
example)
the
Enter.
you