Pci Pnp - Asus RS161-E2 - 0 MB RAM User Manual

5.4.3 5.4.3 5.4.3

PCI PnP

PCI PnP PCI PnP
5.4.3 5.4.3 PCI PnP PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
Advanced
PCI/PnP Configuration
Reset ESCD Data
Plug & Play O/S
PCI Latency Timer
Palette Snooping
OnBoard PCIE LAN Boot ROM
V00.00 (C)Copyright 1985-2004, American Megatrends, Inc.
Reset ESCD Data [No] Reset ESCD Data [No] Reset ESCD Data [No] Reset ESCD Data [No] Reset ESCD Data [No]
Clears the non-volatile RAM (NVRAM) during boot.
Configuration options: [No] [Yes]
Plug And Play O/S [No] Plug And Play O/S [No] Plug And Play O/S [No]
Plug And Play O/S [No] Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
PCI Latency Timer [64] PCI Latency Timer [64] PCI Latency Timer [64]
PCI Latency Timer [64] PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device
latency timer register. Configuration options: [32] [64] [96] [128] [160]
[192] [224] [248]
Palette Snooping [Disabled] Palette Snooping [Disabled]
Palette Snooping [Disabled] Palette Snooping [Disabled] Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
A S U S R S 1 6 1 - E 2 / P A 2 A S U S R S 1 6 1 - E 2 / P A 2 A S U S R S 1 6 1 - E 2 / P A 2 A S U S R S 1 6 1 - E 2 / P A 2 A S U S R S 1 6 1 - E 2 / P A 2
BIOS SETUP UTILITY
[No]
[No]
[64]
[Disabled]
[Enabled]
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3 5 - 2 3