Advertisement
:_
_
cabinet shouM be i_tall_
wifll, a very slight tilt
(a_ut
1/2"),_wr_ard
toward the outside
(See Fi9_5).
Adiust the, bolt a_ the nut of Sill Sup_rt
_) for
baIi_cing t_ c.3bi_t.
Screw(Type
Bi @
A_,a,ct)the cabinet to the window sty! _ driving
1hie_rews
___(Ty_
B: Leith
16mm (5/8 inch),
and bellow.} through tt_ |ro_ a_Je. into win_w
stool.
Pul! each Frame Curtain 0 M_y to each window
_sh track, and repeat _ep 2.
Si# Sup_i1_
A_ach each Frame Cfu_ain Ot_e win_w sash using
screws 0 (Type C) (See Fig 6)
F[oint
Ang{e
Screw(Type B} Q
Sil! Suppo_
Sash track
Fig° 5
CA_ON",
Do not drill a hole In the _ttom
pan. _e
unlt is designed
to operate with
approximately
1_" of water in bottom
pan.
There is no need toi_
water if the pan is
dry.
Fig. 6
Slide _e unit into the cabinet. ,(SeeFig. 7 !
CA_ON;
For _cutlty
purpose, reinstall
screws (Type A) at cabiIn,et"ssides.
Screw(Type
A}
Power
(Type A)
Fig. 7
Cut the Foam-St:rip ® to the pr,operlength and inse_
be_een the upper window sash and _e lower
window sash (See Fi9 ,8)
Fig. 8
Advertisement
