Sony VPL-HW50ES Operating Instructions Manual page 77

7
Remove the filter holder.
8
Remove the air filter.
9
Attach the new air filter so that it
fits into each claws (10
positions) on the filter holder.
Note
Attach the air filter aligning it with the
shape of the filter holder.
Also, do not touch the fan after removing
the air filter that is set deep inside the
projector.
10
Attach the filter holder.
Note
The projector will not turn on unless the
filter holder is securely closed.
11
Wipe dust off the ventilation
holes (intake) with a soft cloth.
Ventilation holes (intake)
12
Place the project back on its
original position.
13
Turn on the projector, then
select the desired setting item
on the Setup
menu screen below will be
appeared.
Claws
Tip
If "Settings Lock" is set to "Level B," set
to "Off" once.
14
Select "Yes".
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.
menu. The
77