Np-Fv30 (Supplied) 150; Np-Fv50; Np-Fv70; Np-Fv100 - Sony HDR-CX190 "Handycam User Manual

"Handycam" User Guide
Operation Search
Before use
Getting started
Recording
Playback
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Getting started > Charging the battery pack > Charging the battery using your computer

Charging the battery using your computer

To charge the battery from a wall outlet (wall socket) using the Built-in USB Cable
Charging time
To remove the battery pack
1. Turn off your camcorder and connect the camcorder to a running computer using the Built-in USB
Cable ( ).
: To the wall outlet (wall socket)
The CHG (charge) lamp turns on.
The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect Built-in USB
Cable from your computer.
To charge the battery from a wall outlet (wall socket) using the Built-
in USB Cable
You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an
AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CP-AH2R, CP-AL, or AC-
UP100 portable power supply device (sold separately) to charge the camcorder.
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack Built-in USB Cable*

NP-FV30 (supplied) 150

NP-FV50

280

NP-FV70

545

NP-FV100

1,000
The charging times shown in the table above are measured when charging the camcorder at a
temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range
of 10 °C to 30 °C (50 °F to 86 °F).
* The charging times are measured without using the USB Connection support cable.
36
Search Print