Sony HDR-AS10 Handbook page 33

Notes
• The Flat Adhesive Mount and Curved Adhesive Mount cannot be used again once they are detached from
the location surface.
• When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is fixed might be
damaged.
• Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture or oily
substances are attached, adhesive strength may be impaired and the item could detach with slight impact.
• Use the appropriate Adhesive Mount (flat or curved) for the surface where the camera will be located. If
the mount is not suitable for the surface, it may detach by slight impact.
• Thread a suitable cord through the attachment hole of the Waterproof Case, then attach the cord to an
item you intend to use with the camera.
• Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat or curved
adhesive mount is securely attached to the surface.
33 US
Continued r