Download Print this page

Sony CMT-V10IP Operating Instructions

Audio system with dock for iphone, ipod, usb port for mp3players, cd and fm / am radio

Advertisement

Quick Links

Micro HI-FI
Component System
GB
Operating Instructions
©2012 Sony Corporation
CMT-V10iP
Europe Only
Europe Only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
WARNING
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if the
To reduce the risk of fire, do not cover the ventilation
battery contains more than 0.0005% mercury or 0.004%
lead.
opening of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources such
By ensuring these batteries are disposed of correctly,
as lighted candles on the apparatus.
you will help prevent potentially negative consequences
for the environment and human health which could
To reduce the risk of fire or electric shock, do not expose
otherwise be caused by inappropriate waste handling of
this apparatus to dripping or splashing, and do not place
the battery. The recycling of the materials will help to
objects filled with liquids, such as vases, on the apparatus.
conserve natural resources.
Do not install the appliance in a confined space, such as a
In case of products that for safety, performance or data
bookcase or built-in cabinet.
integrity reasons require a permanent connection with an
As the main plug of AC adaptor is used to disconnect
incorporated battery, this battery should be replaced by
the AC adaptor from the mains, connect it to an easily
qualified service staff only. To ensure that the battery will
accessible AC outlet. Should you notice an abnormality
be treated properly, hand over the product at end-of-life
in it, disconnect it from the AC outlet immediately.
to the applicable collection point for the recycling of
electrical and electronic equipment.
Do not expose batteries or apparatus with battery-
For all other batteries, please view the section on how
installed to excessive heat such as sunshine, fire or the
to remove the battery from the product safely. Hand the
like.
battery over to the applicable collection point for the
The AC adaptor is not disconnected from the mains as
recycling of waste batteries.
long as it is connected to the AC outlet, even if the main
For more detailed information about recycling of this
unit itself has been turned off.
product or battery, please contact your local Civic Office,
The nameplate is located on the bottom exterior of the
your household waste disposal service or the shop where
main unit and on the surface of the AC adaptor.
you purchased the product.
CAUTION
Note on DualDiscs
The use of optical instruments with this product will
A DualDisc is a two sided disc product which mates
increase eye hazard.
DVD recorded material on one side with digital
audio material on the other side. However, since the
This appliance is classified
audio material side does not conform to the Compact
as a CLASS 1 LASER
Disc (CD) standard, playback on this product is not
product. This marking
guaranteed.
is located on the bottom
exterior of the main unit.
Music discs encoded with copyright
protection technologies
Notice for customers: the following
This product is designed to playback discs that conform
information is only applicable to
to the Compact Disc (CD) standard. Recently, various
equipment sold in countries applying EU
music discs encoded with copyright protection
directives.
technologies are marketed by some record companies.
The manufacturer of this product is Sony Corporation,
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The
Authorized Representative for EMC and product safety is
playable by this product.
Sony Deutschland GmbH, Hedelfi nger Strasse 61, 70327
License and Trademark Notice
Stuttgart, Germany. For any service or guarantee matters
iPhone, iPod, iPod classic, iPod nano, and iPod touch
please refer to the addresses given in separate service or
guarantee documents.
are trademarks of Apple Inc., registered in the U.S. and
other countries.
Disposal of Old Electrical &
MPEG Layer-3 audio coding technology and patents
Electronic Equipment
licensed from Fraunhofer IIS and Thomson.
(Applicable in the European
Windows Media is either a registered trademark or
Union and other European
trademark of Microsoft Corporation in the United
countries with separate
States and/or other countries.
collection systems)
This product is protected by certain intellectual
This symbol on the product or on its packaging indicates
property rights of Microsoft Corporation. Use or
that this product shall not be treated as household
distribution of such technology outside of this product
waste. Instead it shall be handed over to the applicable
is prohibited without a license from Microsoft or an
collection point for the recycling of electrical and
authorized Microsoft subsidiary.
electronic equipment. By ensuring this product is
All other trademarks and registered trademarks are of
disposed of correctly, you will help prevent potential
their respective holders. In this manual,
negative consequences for the environment and human
are not specified.
health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessory: Remote commander
Location of Controls
4-423-934-71 (1)
Unit (Top)
 Display panel
When the system is powered up, the setting status appears on the display panel.
When the system goes to Standby mode, the setting status disappears from the display panel.
Unit (Front)
Printed in China
 Remote indicator
Lights in amber when a signal is received from the remote.
Getting Started
 To AC Adaptor
®
and
marks
 AM loop antenna
 FM lead antenna (Extend it horizontally.)
 Power (DC IN 9.5 V)
 Antennas
Find a location and an orientation that provide good
1
Connect the AC adaptor to the unit.
reception, and then set up the AM antenna.
2
Plug the AC adaptor into a wall outlet.
Keep the antenna away from the power cord to avoid
picking up noise.
 AUDIO IN jack
Connect an external audio component.
Remote
Remote sensor
Remote indicator
CD door
(CD compartment)
This manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or
iPod/iPhone connector
similar names.
The SLEEP and TIMER MENU functions indicated in
pink on the remote can be activated using SHIFT .
If you want to operate the SLEEP or TIMER MENU
functions, press and hold SHIFT  and press SLEEP
 or TIMER MENU  button. If you press either
of these buttons without holding SHIFT  pressed,
the system will activate the BASS BOOST or SOUND
EFFECT function.
To use the iPod/iPhone
1
Open the dock by pushing the center of the dock.
Dock
2
Place the iPod/iPhone.
Operations
To use the remote
Playing a CD/MP3 disc
Remove the battery compartment lid, and insert the two
supplied R6 (size AA) batteries,  side first, matching
1
Select the CD function.
the polarities shown below.
Press CD FUNCTION
on the remote or press
FUNCTION
on the unit repeatedly.
2
Open the CD door.
Press
(Open/Close)
on the unit.
 (Open/Close) 
Notes on using the remote
With normal use, the batteries should last for about 6 months.
Do not mix an old battery with a new one or mix different types of
batteries.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
3
Set a disc.
Push the center part of the disc with two fingers until
the disc snaps into its mounted position.
Set a disc with the
label side facing
forward.
4
Close the CD door.
Press
(Open/Close)
on the unit.
"READING" appears.
5
Start playback.
Press
 
on the remote or press
unit.
To eject a disc
Press
(Open/Close)
on the unit and remove the
disc by pulling up the edge of the disc while holding one
finger against the spindle.
Notes
The system will automatically close the CD door  if a few minutes
elapse of no operation with the CD door open.
Do not set a disc with non-standard shapes (e.g., heart, square, star).
The disc may fall into the system and cause irreparable damage.
Setting the clock
If you press /  with the CD door open, the system will
automatically close the CD door.
1
Press 
to turn on the system.
Do not use a disc with tape, seals or paste on it as this may cause a
2
malfunction.
Press and hold SHIFT
and TIMER MENU
to
When you eject a disc, handle the disc by its edge. Do not touch the
select the clock set mode.
surface.
If "PLAY SET" flashes, press /
repeatedly to
Other operations
select "CLOCK, " and then press
(enter)
.
To
Press
3
Press /
repeatedly to set the hour, then press
(enter)
.
Pause playback
(or 
resume play, press the button again.
4
Use the same procedure to set the minutes.
Stop playback
.
Note
Select a folder on
The clock settings are reset when you disconnect the power cord or if
+/
.
a power failure occurs.
an MP3 disc
Select a track or
/
To display the clock when the system is off
file
Press DISPLAY
. The clock is displayed for about
8 seconds.
Find a point in a
Hold down /
/
track or file
playback, and release the button at
the desired point.
Select Repeat Play REPEAT
"
1" appears.
Eject a disc
on the unit.
To change the play mode
Press PLAY MODE
repeatedly while the player
is stopped. You can select Normal Play mode
("Normal" or "FLDR" for all MP3 files in the folder on
the disc), Shuffle Play mode ("SHUF" or "FLDR SHUF*"
for folder shuffle), or Program Play mode ("PGM").
* When playing a CD-DA (audio) disc, FLDR (SHUF) Play performs
the same operation as normal (SHUF) Play.
Notes on Repeat Play
"
" indicates that all tracks or files will be repeated until you stop
playback.
"
1" indicates that a single track or file will be repeated until you
stop playback.
Notes on Shuffle Play mode
When Shuffle Play mode is set to "SHUF, " the system shuffle-plays
all tracks or files on the disc. When Shuffle Play mode is set to
"FLDR SHUF, " the system shuffle-plays all tracks or files in selected
folder.
When you turn off the system, the selected Shuffle Play mode
("SHUF" or "FLDR SHUF") is cleared and the play mode returns to
Normal Play mode ("FLDR").
Notes on playing MP3 discs
Do not save other types of tracks or files, or unnecessary folders on a
disc that has MP3 files.
Folders that have no MP3 files are skipped.
The system can only play MP3 files that have a file extension of
".mp3. "
Even when file name has the ".mp3" file extension, if the actual
file differs, playing this file may generate a loud noise which could
damage the system may malfunction.
The maximum number of:
 255* folders (including the root folder)
 512 MP3 files
 512 MP3 files in a single folder
 9 folder levels (in the tree structure of files)
Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
* This include folders that have no MP3 or other files. The number
of folders that the system can recognize may be less than actual
number of folders, depending on the folder structure.
Creating your own program
(Program Play)
1
Select the CD function.
Press CD FUNCTION
on the remote or press
FUNCTION
on the unit repeatedly.
2
Select the play mode.
Press PLAY MODE
repeatedly until "PGM"
appears while the player is stopped.
3
Select a folder (MP3 disc only).
Press
+/
repeatedly to select the desired
folder.
4
Select the desired track or file number.
Press /
repeatedly until the desired track
or file number appears.
Selected track or file
Total playing time
number
Total playing time for all the programmed tracks or
files, including the selected track or file, is displayed at
right on the panel.
5
Program the selected track or file.
Press
to enter the selected track or file.
"--.--" appears when the total playing time exceeds
100 minutes for an CD or when you program MP3
files.
6
Repeat steps 3 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
7
To play your program of tracks or files, press 
(or
 
on the unit).
The program remains available until you remove the
disc from the disc compartment  or unplug the
power cord.
To play the same program again, press 
(or 
 on the unit).
 
on the
To cancel Program Play
Press PLAY MODE
repeatedly until "PGM"
disappears while the player is stopped.
To delete the last track or file of the program
Press CLEAR
while the player is stopped.
Listening to the radio
1
Select the TUNER function.
Press TUNER FM/AM FUNCTION
on the remote
repeatedly or press FUNCTION
on the unit
repeatedly.
2
Perform tuning.
For automatic scanning
Press TUNING MODE
repeatedly until "AUTO"
appears, and then press +/
. Scanning stops
on the unit). To
automatically when a station is tuned in, and
"TUNED" and "STEREO" (for stereo programs only)
light up in the display.
//
.
(or
If "TUNED" does not light up and the scanning does
on the unit) during
not stop, press 
to stop scanning, then perform
manual tuning (below).
When you tune in a station that provides RDS
repeatedly until "
" or
services, information such as the service name or
station name is provided by broadcasts.
For manual tuning
Press TUNING MODE
repeatedly until
"MANUAL" appears, and then press +/
repeatedly to tune in the desired station.
Tip
To reduce static noise on a weak FM stereo station, press FM MODE
repeatedly until "MONO" appears to turn off stereo reception.
Presetting radio stations
1
Tune in the desired station.
2
Press TUNER MEMORY
to select the tuner
memory mode.
Preset number
3
Press +/  or ///
repeatedly to select
the desired preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
station.
4
Press
to register the station.
5
Repeat steps 1 through 4 to register other stations.
You can preset up to 20 FM and 10 AM stations.

Advertisement

loading