Sharp LC-57D90U Operation Manual page 7

Installing the wall-mount bracket (Continued)
Connect the system cables and power cord to the terminals on the back
4
of the LCD color TV.
System cables
Use the cable holder at the center of the back of the LCD color TV and the cable holders
5
holding the speaker cables to connect the system cables.
Remove the screw hole plugs (4 plugs) of
6
the wall-mount bracket on the back of the
TV and then screw in the 4 wall-mount
bracket unit screws (hexagonal socket
screws, M10 length: 30 mm) that are in-
cluded with the wall-mount bracket unit.
Carefully keep the removed screw hole plugs.
E-6
Cable holders
Surround the system cables.
(1) Pass through
the band.
(2) Pull the band
forward and
catch it on
the hook.
Screw hole plugs (4 plugs)
Power cord
Included part
Allen wrench
Hexagonal socket screws
(M10 length: 30 mm)
Mark A
Included hexagonal socket screws (4 screws)
Use an Allen wrench to screw in the included
hexagonal socket screws into the Mark A holes.
Wall-mount bracket