Printing Lists Of Programmed Information, Settings, And Communication Activity - Sharp MX-M202D Operation Manual

PRINTING LISTS OF PROGRAMMED
INFORMATION, SETTINGS, AND
COMMUNICATION ACTIVITY
You can print lists showing programmed information, settings, and communication activity.
The following lists can be printed.
• ACTIVITY REPORT: This report shows information on your most recent transmissions and receptions, including
communication time and the other party.
• TIMER LIST: This list shows timer transmissions and recall mode jobs.
• MEM. POLLING LIST: This list shows information on the documents and settings stored for memory polling and
F-code memory polling.
• RAPID # LIST: This list shows the information stored in each Rapid key that has been programmed.
• SPEED # LIST:This list shows the information stored in each Speed Dial number that has been programmed.
• GROUP LIST: This list shows the information stored in each group key that has been programmed.
• TELEPHONE # LIST:This list shows the destinations that have been stored in auto dial numbers in the order of
their search characters.
• PROGRAM LIST: This list shows the contents of each program that has been stored.
• SUB ADD SET LIST: This list shows the sub-addresses and passcodes that have been programmed for F-code
communication. (Note that print passcodes are not shown in the list.)
• CONF. RX LIST: This list shows the confidential box numbers that have received confidential faxes and the
number of pages received.
• INBOUND ROUTING LIST:This list shows various settings used at the time of inbound routing.
1
In Fax mode, press the [SPECIAL
FUNCTION] key.
Begin the following procedure from the base screen of
Fax mode.
When the [SPECIAL
ON LINE
DATA
SPECIAL
FUNCTION] key is pressed, the
FUNCTION
function selection menu
appears.
LINE
(To select fax mode, see step 1
COPY EXPOSURE PAPER SE
DATA
SCAN COLOUR MODE RESOLUT
on page 17).
2
Select "PRINT" with the [ ] or [ ] key.
PQ
DED COPY
LEX SCAN
LEX SCAN
ACC
3
Press the [OK] key.
GHI
BACK OK
PQRS
SPECIAL FUNCTION
COMM. SETTING
ORIGINAL STORE
PRINT
4
Select "REPORT" with the [ ] or [ ]
key.
5
Press the [OK] key.
OK
6
Select the list that you wish to print
with the [ ] or [ ] key.
See the explanation of the lists that can be printed
above.
7
Press the [OK] key.
• The list is printed (or is
OK
stored).
• If the list does not contain any
data, it will not be printed.
PRINT
REPORT
CONF. RX DATA
6
REPORT
ACTIVITY REPORT
TIMER LIST
MEM. POLLING LIST
RAPID # LIST
85