Samsung XE700T1C User Manual page 114

Recovering/Backing up the Computer
• Recovery may not be provided or may be a different
version depending on the model.
• For models where the HDD or SSD is less than 64GB, no
Recovery program is provided.
• The instructions are provided based on Recovery 6.0
version. Some functions may differ slightly or be excluded
depending on the version. Refer to the program's Help
section for more information.
• An ODD (CD/DVD drive, etc.) is not supported by the
Recovery program.
F4 key is equivalent to pressing the Power
• Pressing the
button while holding down the Volume (+) button.
Hereafter, the F4 key operation described in this manual
can be simulated by pressing the Power and Volume (Up)
buttons.
Recovering
You can recover your computer to the default (factory) status
when your computer does not boot up.
1
- If Windows does not start
Press the power button while holding down the volume
button (+). The computer enters restoration mode.
(Optional)
- If Windows is run
Right-click over the Start screen. Click Recovery in the All
Apps
menu item.
2
If the initial menu screen appears, click Recover.
Select a recovery point and click Recover.
If you set the User Data Maintenance to ON, the computer is
restored while maintaining the current user data.
3
Recover is performed based on the screen instructions.
If the recover is completed, you can use your computer
normally.
Chapter 5.
113
Troubleshooting
Default Recovery
Point
Reinstalls Windows
and restores your
computer to the
status when the
network driver was
installed.
User's Backup Point
Restores your
computer to a
previously backed up
status.