2
Using "MHL(Mobile High-Definition Link)"
2.1.2 Disabling "MHL"
Disabling MHL by using the [MHL] button
When MHL is active, press the [MHL] button. The MHL function will be disabled.
The input source changes automatically only when a cable is connected to a port other than [HDMI IN 2
/ MHL].
When the cable is disconnected or the mobile device is powered off
If the MHL cable is disconnected or the mobile device is powered off when MHL is active, the MHL
function will be disabled.
MHL
If the MHL cable is disconnected, the product will display the message
remain in MHL mode.
The indicated time "3 sec later" may vary depending on the mobile device.
MHL
MHL
MHL device disconnected.
DSUB
(or HDMI1)
[MHL]
DSUB/HDMI1
Check Signal Cable
HDMI2/MHL
MHL
3 sec later
MHL
2 Using "MHL(Mobile High-Definition Link)"
Check Signal Cable
HDMI2/MHL
Check Signal Cable
and
28