Other Features; Set The Alarm Timer; Set The Sleep Timer; Adjust Display Brightness - Philips DC290/37 User Manual

6 Other features

Set the alarm timer

You can set two alarms which go off at different
time.
1
Ensure that you have set the clock correctly.
(See "Get started - Set time and date".)
2
Press and hold ALM 1 or ALM 2 for 2
seconds.
» [AL 1] or [AL 2] begin to blink.
3
Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone, FM
tuner, or buzzer.
4
Press ALM 1 or ALM 2.
» The hour digits begin to blink.
5
Press / repeatedly to set the hour.
6
Press ALM 1 or ALM 2 to confirm.
» The minute digits begin to blink.
7
Repeat steps 5-6 to set the minute.
8
Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9
Repeat steps 5-6 to set the alarm volume.
Tip
•
If you set iPhone/iPod playlist as the sound
source, you must create a playlist in iTunes
called "PHILIPS" and import it to your iPhone/
iPod.
•
If no playlist is created in the iPod/iPhone or
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
Activate and deactivate the alarm timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [
[ AL2] is displayed.
» If the timer is deactivated, [
[ AL2] disappears.
EN
14
Repeat alarm
1
Stop alarm ring
1
View the alarm settings
1

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
To deactivate sleep timer
1

Adjust display brightness

1
AL 1] or
AL1] or
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
•
You can press /
repeat alarm.
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
Press ALM 1 or ALM 2.
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows
gradually decrease in the last 5 minutes.
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When the sleep timer is deactivated,
disappears on the display.
Press BRIGHTNESS/REP ALM
repeatedly to select different levels of
display brightness.
to adjust the interval to
, and the volume will