Connecting with a HDMI mini cable
Select the desired method of HDMI output.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
MENU
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
j When the 1080/60p recording mode is turned on/off during Motion Picture Recording
Mode
j When you touch the play mode select icon to select [1080/60p], and then touch [ENTER]
during Playback Mode.
j When the 1080/60p or 1080/60i scenes are switched.
Connecting with the AV multi cable
Select the desired setting of AV multi connector output.
: [SETUP] # [AV MULTI] # desired setting
MENU
[COMPONENT]:
[AV OUT]:
Changing the component output setting
: [SETUP] # [COMPONENT OUT] # desired setting
MENU
[1080i]:
When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)
[480i]:
When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
≥ Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the component
terminal to confirm the recording. (l 59)
104
VQT3W31
When connecting to the component terminal
When connecting to the video terminal