Table of Contents
Advertisement
2
Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start standby mode.
≥ The lens cover does not close.
3
Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ Quick Start Standby Mode is canceled if
j about 5 minutes have elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (l 43)/[ECONOMY (AC)] (l 43), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
[ALERT SOUND]
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
(Volume low)/
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 141)
[SELECT OPERATION ICONS]
You can change the operation icons to display in the Touch Menu.
Register 3 favorite operation icons.
≥ The default settings are,
Picture Recording Mode, and
Compensation) for Still Picture Recording Mode.
1
Touch [SELECT OPERATION ICONS].
2
Touch the operation icon you would like to change to cancel the setting.
3
Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4
Touch [ENTER].
≥ For details about the function of each operation icon, refer to page 55.
44
VQT3Y41
/
(Volume high)
(Fade),
(PRE-REC) and
(Built-in flash),
/[OFF]
(Self-timer) and
(Video Light) for Motion
(Backlight
Advertisement
Table of Contents
