Panasonic Viera TC-L32X5 Owner's Manual page 15

OK
■
Press to exit from
a menu screen
■
Press to go back to
the previous screen
Note
●
If you turn off the TV before selecting the viewing mode (step
turn on the TV.
On the other hand, if you turn off the TV after selecting the viewing mode (step
setup", this procedure will not launch again on your next power on.
●
You can repeat "First time setup" by selecting "Reset to defaults" in the "Setup" menu (p. 33)
●
After "First time setup", you can also change "Language" and "ANT/Cable setting" from the "Setup" and "TV" menus
respectively. (p. 32)
●
About broadcasting systems
Analog (NTSC):
Conventional broadcasting
Digital (ATSC):
New programming that allows you to view more channels featuring high-quality video and sound
ANT/Cable setup
Select signal type ("Over-the-Air")
ANT/Cable setting
How does the TV receive its
Over-the-Air
programming content?
Cable Service (No Box)
Back Select Next
Select "Auto Program" and start scanning
Auto program
Start scanning for available
Auto Program
channels in your area?
Skip
Auto scan may take 20 minutes or more to complete.
0%
Back Select Next
Scanning starts
Step 4 of 5
Auto program
This may take some time to
complete.
Status : Scanning...
Analog Channels : 0
Digital Channels : 0
2%
Complete First time setup
Congratulations! You are done.
Congratulations!
Setup is complete.
Enjoy your Panasonic VIERA TV.
Press OK to exit.
Back EXIT
To watch TV via a Cable box, Satellite receiver, or any other source (DVD,
DVR, gaming device, etc.), press the [INPUT] button and select the appropriate
input.
Select
Step 3 of 5
OK
Return
Select
Step 4 of 5
OK
EXIT Return Exit
Return
), "First time setup" will launch again when you next
) but do not complete "First time
15