Connecting The Ac Adapter; Setting The Clock; Setting The Clock Automatically - LG ND5520 Owner's Manual

10 Getting Started
Connecting the AC
Adapter
1
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
>
Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
ND5520-FM.BGBRLLK_ENG.indd 10

Setting the Clock

,
Note
If the power has been interrupted or the
power plug has been disconnected, the clock
setting is erased.
Setting the Clock
Automatically
,
Note
y Make sure that your iPod/iPhone/iPad
or your Android device has set the clock
correctly.
y In standby mode, the clock will not
synchronize with your iPod/iPhone/iPad or
your Android device.
y In auto clock synchronization, "LG Bluetooth
Remote" app has priority over the docking
system.
y The 24 hour format can be set only for
Android OS.
Setting the Clock by Synchronizing
with Your iPod/iPhone/iPad
Connect the iPod/iPhone/iPad firmly. Then the
clock setting in the control panel will synchronize
with your iPod/iPhone/iPad.
,
Note
The synchronized time may be slightly
different from that of your iPod/iPhone/iPad.
Setting the Clock through "LG
Bluetooth Remote" App
Install "LG Bluetooth Remote" app on your iPod/
iPhone/iPad or your Android device. (see page 17-
18)
Your unit's clock will be automatically synchronized
with your device by activating Bluetooth
connection through "LG Bluetooth Remote" app.
12. 5. 31. 2:01