Burner Caps And Heads - LG LRG3021ST User Manual

BURNER CAPS AND HEADS

• DO NOT use bleach on product to clean.
BURNER CAPS
Lift off when cool. Wash burner caps in hot, soapy water
and rinse with clean water. To remove burned on food
particles, you may scour with a plastic scouring pad.
Burner cap is
properly seated.
BURNER HEAD/CAP ASSEMBLY
The burner heads assembly are removable. Simply lift
them off the range for cleaning. For even and
unhampered flame, the slits in the burner heads must be
kept clean at all times. Clogged or dirty burner ports or
electrodes will not allow the burner to operate properly.
Any spill on or around an electrode must be carefully
cleaned. Take care to not hit an electrode with anything
hard or it could be damaged.
You should clean the burner caps and heads routinely,
especially after bad spillovers which could clog the
openings. Lift them off when they are cool.
If you want to remove burned-on food, soak the burner
heads in a solution of mild liquid detergent and hot water
for 20–30 minutes. For more stubborn stains, use a
toothbrush.
NOTES:
• DO NOT use steel wool or scouring powders to clean
the burners.
• Burners will not light if the cap is removed.
AFTER CLEANING
Burner cap is NOT
Before replacing the burner caps and burner heads shake
properly seated.
out excess water and then dry them thoroughly.
REPLACEMENT
Replace burner heads and caps over the electrodes on
the cooktop, in the correct locations according to their
size.
Make sure the hole in the burner head is positioned over
the electrode.
CA R E A N D C L E A N I N G
Medium burner
head and cap
Large burner
head and cap
Hole
Electrode
Small burner
head and cap
Extra large burner
head and cap
25