Table of Contents
Advertisement
Use the increment and decrement buttons to adjust the image as
3.
described in the table above.
Note
For small changes, press the increment or decrement button once. To
make a setting change continuously, hold down the increment or
decrement button.
Repeat steps 2 and 3 for any other display settings you want to
4.
change.
When you are satisfied with the image you see, save the modified
5.
display setting(s) by turning the selector switch counterclockwise
to the operate position.
Follow these steps to recall a factory-set display mode:
1.
Display an image for which you want to recall the factory settings.
(This ensures the monitor is operating in the factory-set mode you
want to recall.)
2. Turn the selector switch clockwise to any one of the display
setting positions.
3.
Press the recall button by inserting a narrow instrument, such as a
ball point pen, into the recall hole.
4. Turn the selector switch counterclockwise to the operate position.
The microcontroller replaces your modifications with the original
factory settings for the current display mode.
Note
If the monitor is in a user-defined display mode, the preceding steps have no
effect.
Professional
14
Series
Monitor
Advertisement
Table of Contents
