Ae Lock Effects; Af Mode And Film Advance Mode Combination - Canon EOS ELAN 7NE Date Instructions Manual

AE Lock Effects

AF Point Selection
Method
Metering Mode
Z Evaluative
C.Fn-08-0
X Partial
C.Fn-08-1
C Center-weighted
averaging
∗ If you use Eye Control AF and press the <j> button before you press the
shutter button halfway, AE lock will be applied to the center AF point.

AF Mode and Film Advance Mode Combination

Film Advance
Mode
The picture cannot be
taken until focus is
achieved. When focus
is achieved, it also
locks at the same
J
time. The evaluative
(Single frame)
metering's exposure
setting is also locked.
(The exposure setting
is retained until the
picture is taken.)
The same conditions
above apply during
H
continuous shooting.
(Continuous)
(approx. 4 frames per
sec.)
92
Manual AF Point
Selection / Eye Control
AE lock is set at the
selected AF point.
AE lock is set at the
center AF point.
AE lock is set at the
selected AF point.
AE lock is set at the
center AF point.
One-Shot AF
Automatic AF Point Selection
AE lock is set at the AF point
which achieved focus.
AE lock is set at the center
∗
AF point.
AI Servo AF
The subject is focus-
tracked for continuous
autofocus. The
exposure is set when
the picture is taken.
The same conditions
above apply during
continuous shooting.
(approx. 3.5 frames
per sec.)
AI Focus AF
Automatically
switches between
One Shot AF and AI
Servo AF according
to the subject status.