Eject (Waiting For Ink To Dry After Printing) - Canon imagePROGRAF iPF6100 User Manual

Handling rolls

Eject (waiting for ink to dry after printing)

Important
•
When cutting wide printed documents after ejection, support the documents. If the paper drops, printed
documents may be damaged.
•
Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ► button.
3.
Press ▲ or ▼ to select the type of paper, and then press the ► button.
4.
Press ▲ or ▼ to select Cutting Mode, and then press the ► button.
5.
Press ▲ or ▼ to select Eject, and then press the OK button.
6.
Start printing.
Roll paper is fed to the specied cut position and then automatically stopped.
7.
As you support the printed document to prevent it from dropping, hold down the Stop button
for at least a second to cut the roll.
130 Handling Paper