Table of Contents
Advertisement
and then click Finish.
8. Follow the instructions provided by the Add Printer Wizard.
NOTE: The printer drivers for the printer must either be on the computer system,
or you must have the drivers available on a CD.
9. In Properties, click OK to accept the default settings, or change the settings and then
click OK.
You are now able to print from this computer to the Bluetooth printer.
Print from Another Bluetooth Device to a Standard
Printer That Is Physically Connected to This Computer
To print from another Bluetooth device to a standard printer that is physically connected to
this computer
1. Verify that the local printer is physically connected to this computer by a cable, is set
as the default printer, and is turned on.
2. From this computer, open My Bluetooth Places.
3. Click View My Bluetooth services.
4. Right-click My Printer, and then click Enable.
5. Refer to the manual that came with your Bluetooth device for instructions on how to
print to another Bluetooth device.
-or-
If you are using a Bluetooth enabled computer, see
This
Computer.
NOTE: If the Secure connection property for the printer has been set on either
computer, the operators of both computers must be available to allow access and to
supply the Bluetooth security code when requested (see
and Authorization
necessary to supply the security code.
Establish a Virtual Serial Port Connection Between
This Computer and Another Bluetooth Device
To establish a virtual serial port connection between this computer and another Bluetooth
device
1. From this computer, open My Bluetooth Places.
2. Click Bluetooth Setup Wizard.
3. Click I know the service I want to use and I want to find a Bluetooth device
that provides that service, and then click Next.
4. Click Bluetooth Serial Port in the Bluetooth Service Selection list, and then click
Next.
Messages). Thereafter, access is granted automatically and it is not
Print to a Bluetooth Printer from
Respond to Bluetooth Security
Advertisement
Table of Contents
