Asus Z9PE-D16 User Manual page 145

3. The utility immediately starts rebuilding after the disk is selected. The status
of the degraded RAID volume is changed to "Rebuild".
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
ID Name
0 Volume0
Physical Devices:
Port Drive Model
1 ST3160812AS
2 ST3160812AS
Volumes with "Rebuild" status will be rebuilt within the operating system.
[↑↓]-Select
4. Exit Intel Rapid Storage Technology and reboot the system.
5. Under Microsoft
®
Storage > Intel Rapid Storage Console or click the Intel Rapid Storage
Technology tray icon to load the Intel Rapid Storage Manager utility.
From the View menu, select Advanced Mode to display the details of the
6.
Intel Rapid Storage Console.
From the Volumes view option, select RAID volume to view the rebuilding
7.
status. When finished, the status is changed to "Normal".
Rebuilding the RAID with a new hard disk
If any of the SATA hard disk drives included in the RAID array failed, the system
displays the status of the RAID volume as "Degraded" during POST. You may
replace the disk drive and rebuild the RAID array.
To rebuild the RAID with a new hard disk:
1. Remove the failed SATA hard disk and install a new SATA hard disk of the
same specification into the same SATA Port.
Select a destination disk with the same size as the original hard disk.
2. Reboot the system and then follow the steps in section Rebuilding the RAID
with other non-RAID disk.
ASUS Z9PE-D16 Series
[ MAIN MENU
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION
Level Strip
RAID1(Mirror) N/A
Serial #
9LS0F4HL
3LS0JYL8
[ESC]-Exit
Windows OS, select Start > Programs > Intel Rapid
All Rights Reserved.
]
]
* = Data is Encrypted
Size Status Bootable
149.0GB Rebuild Yes
Size Type/Status(Vol ID)
149.0GB Member Disk(0)
149.0GB Member Disk(0)
[ENTER]-Select Menu
5-33