Table of Contents
Advertisement
2.2.3
Creating a Storage Configuration
This section explains how to use the WebBIOS CU Configuration Wizard to
configure RAID arrays and virtual drives.
The default settings of the configuration items mentioned in this section are
subject to change without notice, but the functions of the items will not be
affected.
Selecting the Configuration with the Configuration Wizard
Follow these steps to start the Configuration Wizard, and select a configuration
option and mode:
Click Configuration Wizard on
1.
the WebBIOS main screen. The
first Configuration Wizard screen
appears, as shown in the right
figure.
2.
Select a configuration option.
If you choose the first or second option, all existing data in the configuration will
be deleted. Make a backup of any data that you want to keep before choosing
these options.
Clear Configuration: Clears the existing configuration.
•
New Configuration: Clears the existing configuration and lets you
•
create a new configuration.
Add Configuration: Retains the existing storage configuration and adds
•
new drives to it (this does not cause any data loss).
Click Next. A dialog box warns that you will lose data if you select Clear
3.
Configuration or New Configuration.
4.
On the next screen, select a configuration mode:
Manual Configuration: Allows you to control all attributes of the new
•
storage configuration.
Automatic Configuration: Automatically creates an optimal RAID
•
configuration.
2-8
Chapter 2: RAID configuration
Advertisement
Table of Contents
