Flexbass - Asus Xonar DGX User Manual

6.6 Fle�Bass
FlexBass, an advanced bass management and enhancement mechanism, allows
you to select each satellite speaker's type for optimal sound performance from the
speakers. (Small: common speaker that cannot produce low frequencies; Large:
wide-band speakers that can produce low frequencies well). It comes with an
adjustable crossover frequency for the boundary of the bass signals. FlexBass will
filter out the bass signals from small speaker channels and redirect them all to the
subwoofer or Large speakers.
1
2
3
No Item
1 On/Off
2 Small / Large speaker
option
3 Picture for Small/
Large speaker
4 LFE Crossover
Frequency
38
4
Description
Click this switch to turn on or off all functions on this
FlexBass page.
Select the speaker type that you connected. If your speaker
type cannot perform low-frequency signals (bass), select
"Small" speaker type and Xonar DGX will filter out the bass
signals and send them to the subwoofer channel. If those
speakers are full-range, you can select the "Large" speaker
type.
Note: Usually, low-cost PC's 2-channel speakers are
small-type speakers. Refer to the speaker's specification.
If you have any questions, consult your speaker vendor.
However, common 2.1 speakers with a subwoofer should
be categorized as Large speakers because the subwoofer
can redirect the bass signals inside the two channels to the
subwoofer speaker automatically.
Colors for small/large speakers are different.
Orange: large speakers
Green: small speakers
Adjusts the cut-off frequency (50~250Hz) for LFE (low-
frequency effects) signals. Xonar DGX will filter out the bass
signals below the crossover frequency from small speaker
channels and forward them to the subwoofer. The higher
the crossover frequency, the more bass signals will be
subtracted.
ASUS Xonar DGX