System Agent Configuration; Me Subsystem - Asus P8B75-M/CSM User Manual

Hide thumbs Also See for P8B75-M/CSM:
Table of Contents

Advertisement

S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] and allows you
to enable or disable the hot-plug support for each SATA port. Configuration options: [Enabled]
[Disabled]
2.5.5

System Agent Configuration

Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration
options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU.
Configuration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use
when idle. Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function support, set this item to
[Enabled] to empower both integrated and discrete graphics. iGPU shared system memory size is
fixed in 64MB. Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1] [Gen2]
2.5.6

ME Subsystem

The items in this menu allow you to change the Intel
ME Subsystem [Enabled]
Allows you to enable or disable accessing the ME subsystem. Configuration options:
[Enabled] [Disabled]
End of Post Message [Enabled]
This item appears only when you set the ME Subsystem item to [Enabled]. Configuration
options: [Enabled] [Disabled]
Execute MEBx [Enabled]
Allows you to enable or disable the Intel
feature. Configuration options: [Enabled] [Disabled]
2-18
Allow you to enable remapping the memory above 4GB.
Disables this function.
Management Engine (ME) feature.
®
Management Engine BIOS Extension (MEBx)
®
ASUS P8B75-M

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P8b75-m

Table of Contents