System Panel Connector - Asus P8B75-M LX PLUS User Manual

4. System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
P8B75-M LX PLUS
P8B75-M LX PLUS System panel connector
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
• ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
1-28
F_PANEL
PWR LED PWR BTN
PIN 1
+HD_LED RESET
Chapter 1: Product introduction