Available Menu Bar Options; Product Menu; View Menu - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Using the Products View

Available Menu Bar Options

The following options are active only in the Products view. For information on other
menu options, refer to

Product Menu

New — Choose this option to display the New Product dialog box. Use this dialog
box to identify a product to the HAFM and add its icon to the Products view. You can
also choose this option from the view pop-up menu by right clicking in the view away
from product icons. For details on this option, refer to
pop-up menu.
Logout — Choose this option to log out of the current session, close the HAFM, and
close any open Product Managers. The HAFM Login dialog box displays.
Exit - Choose this option to close the HAFM and any open Product Managers.

View Menu

User Sessions — This displays the User Session table. This table list all the current
management sessions, including the name of each user connection, the network
address of the user, and the time when the connection was established.
Arrange Icons — Use this option to modify the display of product icons in the view.
• By Name — Arrange icons alphabetically by product name.
• By Severity — (Default). Arrange icons according to the product's operating
status. Failed products appear first, followed by products with degraded, then
unknown operational status. Within these groupings, icons appear alphabetically
by their network address (IP address or DNS host name) or product name,
depending on the selected display option.
You can also arrange icons by name and severity by selecting the Sort option from the
view pop-up menu by right-clicking in the view, away from product icons.
Enable Fly-Over Display — When Fly-Over Display is enabled (View menu on
menu bar), move the cursor over fabric products in the tab's view area to display the
product's WWN over the product icon. Moving the cursor over the ISL lines between
products displays the actual number of ISLs between the products.
Disable the fly-over display by selecting and removing the check mark by the Enable
Fly-Over Display option.
4–10
Chapter 3, Using the Menu Bar.
New on page 4-4 under the view
ha-fabric manager user guide