4
Configuring SAN products and fabrics
This chapter provides instructions for configuring products, fabrics, and trap forwarding.
• Managing SAN
• Configuring Enterprise Fabric
• Configuring fabric
• Persisting and unpersisting
• Configuring trap
Managing SAN products
Use the HAFM application to manage discovered products.
This section describes the following topics:
• Using the Element
• Searching for products in a
• Changing product
• Determining product
• Displaying service
• Displaying routes between
• Displaying fabric
Using the Element Manager
You can use the Element Manager to manage switches and directors directly from the HAFM
application.
NOTE:
Use only one copy of the application to monitor and manage the same devices in a subnet.
Opening multiple copies of the application could result in errors.
Opening the Element Manager from the user interface
Use the Element Manager to search for a product, change product properties, and perform other
configuration and maintenance tasks.
There are two ways to open the Element Manager from the HAFM user interface:
•
Right-click a product icon and select Element Manager.
•
Double-click a product icon.
Opening the Element Manager from the command line
The HAFM application contains a script that opens an Element Manager. To use the script:
1.
Ensure that the HAFM appliance is running and the product is discovered.
products, page 77
Mode, page 82
binding, page 83
fabrics, page 84
forwarding, page 87
Manager, page 77
SAN, page 78
properties, page 78
status, page 79
requests, page 79
ports, page 79
properties, page 81
HA-Fabric Manager user guide
77