Slip Paper Handling; Validation Paper Handling - Epson TM-U375 User Manual

Slip Paper Handling

Use only slip paper (flat paper without wrinkles, creases, or folds) that
matches the specifications.
Note:
Be sure to install the paper
print only on slip paper. This will prevent paper jams.
1. Send the appropriate control commands from the computer to print on
slip paper.
2. When the VALIDATION/SLIP light flashes, insert a slip into the slip
paper inlet as shown in the illustration below.
Make sure you insert the slip paper into the inlet as far as it will go.
3. The paper will automatically be drawn in and printing will begin.
Note:
When the
application software), remove the paper from the paper path.

Validation Paper Handling

Use only validation paper (flat paper, without wrinkles, creases, or folds)
that matches the specifications.
Note:
Be sure to install the paper roll in the printer, even if you plan to
print only on validation paper. This will prevent paper jams.
2-4 Using the Printer
roll
VALIDATION/SLIP
in the printer, even if you plan to
light flashes (this depends on the