Canon iP4000 - PIXMA Photo Printer Service Manual page 29

Manual cleaning - Via the operation panel (All at the same time only)
(Black/Color/All at the same - Via the printer driver (Selectable from Black, Color, or
time)
Deep cleaning Via the printer driver (Selectable from Black, Color, or All
at the same time)
(Black/Color/All at the same
time)
If the print head has not been
capped before power-on
(All in sequence)
*1: The dots since the previous cleaning are counted by Black and Color separately. For this reason, the cleaning mode may differ according to Black or
Color.
*2: When 24 to 60 hours have elapsed since the previous Black cleaning, timer cleaning - 0 is performed. However, this cleaning will be conducted up
to 5 times from the printer installation, and no further timer cleaning - 0 will be performed.
*3: The period of time since the previous cleaning is counted by Black and Color separately. For this reason, the cleaning mode may differ according to
Black or Color.
All at the same time)
<Part 2: 2. CLEANING MODE AND AMOUNT OF INK PURGED>
0.14 (Black)
0.50 (Color)
1.58 (Black)
1.00 (Color)
0.30 (Black)
1.00 (Color)
2 - 3
45 (All at the same time)
30 (Black)
40 (Color)
65 (All at the same time)
45 (Black)
50 (Color)
45 (All in sequence)
To the top