Digital Audio Out - Magnavox 32MD357B - 32" LCD TV User Manual

Settings
Installation Source
TV
Language
DVD
Autoprogram
AV1
Source
Clock AV2
AV3
Weak channel installation
HDMI1
Current software info
HDMI2
Reset AV settings
Side
Info
Settings
Installation Clock
Language
--
Autoprogram
L
HDMI2 HDMI1
VIDEO
Source VGA
IN
R
Clock PC IN
S-VIDEO
Weak channel installation
AV3
HDMI
Current software info
Reset AV settings
Info DVI
Settings
Installation Source
TV
Language
DVD
Autoprogram
Settings Source AV1
Installation Reset AV settings
Clock AV2
L
Language
DVI AV3
Weak channel installation
R
Start now
Autoprogram
HDMI1
Current software info
Source HDMI2
Reset AV settings
Clock Side
Weak channel installation
Info
Current software info
Reset AV settings
Info
Settings
Installation Clock
Language
--
Autoprogram
Source
Clock
Weak channel installation
Current software info
Reset AV settings
Info
Settings
Installation Reset AV settings
Language
Start now
Autoprogram
Source
Clock
Weak channel installation
Current software info
Reset AV settings
Info
--
: AM
Y Pb Pr L R
AV1
Y Pb Pr L R
AV2
AV3:
Audio L/R
--
: AM
Source
This menu allows you to identify the accessory devices you have
connected to the external inputs/outputs.
Select Source in the Installation menu.
Press the cursor right to enter the list, and press up/down key to
2
the selected input.
Press OK button to confirm.
3
Analog Audio In
If your accessory device has a DVI output connector, only the
video signal is transmitted in digital format. To input an audio signal,
please connect the analog audio L and R outputs to the TV's L and
R AV3 audio input plugs.

Digital Audio Out

In addition to accepting audio input through HDMI, the TV can
output Digital audio through the DIGITAL AUDIO OUT
(SPDIF OUT) connector to an external amplifier or receiver.
If your amplifier or receiver has a matching connector for Digital
Audio In, you can connect it with a single cable to the TV's
DIGITAL AUDIO OUT (SPDIF OUT). See Cover and Connection.
Clock
This allows you to use your TV as a clock.
Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
2
Press the cursor right to enter the list, and press up/down key to
3
set the time. (hour/ minute/ AM or PM)
4
Press OK button to confirm.
15