Advertisement
Connecting to your input components
DC 9V
200mA
DBS
1. Make the video connection.
For the first component, connect EITHER an S-Video cable or a composite video
cable to the corresponding IN1 VIDEO jack on the switcher's back panel.
Connect the other end of the cable to the component's video output jack.
2. Make the audio connection.
For the first component, connect a stereo audio cable to the IN1 AUDIO jacks on
the switcher's back panel.
Connect the other end of the cable to the component's audio output jacks.
Make sure you match the color coding at the end of the cables with the color
coding on the jacks—match red with red and white with white.
3. Repeat the video and audio connection steps for your other input components on
IN2, IN3 and IN4.
As you connect your components to the input jacks, note which component you
have connected to each jack in the space provided below. This information is
important to have handy.
2
AUDIO IN 1 VIDEO
AUDIO IN 2 VIDEO
L
L
R
R
S
S
OR
OR
DVD
RefeReNCe CHART
INPUT 1 INPUT 2
Note which component you connect to each input.
AUDIO IN 3 VIDEO
AUDIO IN 4 VIDEO
L
L
R
R
S
S
OR
OR
VCR
CAMCORDER
INPUT 3 INPUT 4
AUDIO OUT VIDEO
L
R
S
VIDEO
GAME
(Audio/Video
or
S-Video
hook-up
only)
Advertisement
