DirecTV SWM8R103 Specifications

Model #
SWM-8
SWM-8
FEATURES:
• Provides eight (8) independent channels for supporting up to 8 DIRECTV satellite tuners
• Provides two outputs to serve two customer dwellings (typical)
• Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals
• Provides AGC for the satellite input signal.
• Die-cast housing is suitable for both indoor and outdoor use.
• Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover
PARAMETER
Input Frequency Range
Number of Input Ports
Satellite
Off-air Terrestrial & SMATV /CMTS
Input Signal Power Level
Output Frequency Range
SWM Channel frequencies:
Channel 1 through 9
Number of SWM Module Output Ports
Satellite
Off-air Terrestrial & SMATV & Return Path
Output Signal Power Level
DC Power
Power Supply (24Vdc, 2.1A)
Ground stud
Dimensions LxWxH
Weight
Environmental Requirements
Operating temperature range
Humidity
Mechanical Housing
Single Wire Multi-Switch (8 Channel)
Eight (8) channel Single Wire Multi-switch (SWM). Allows any
transponder from any satellite input to be independently selected and
distributed via one of eight designated SWM output frequency channels.
onto a single home-run wire to the dwelling
existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
Description
UNIT
MHz 250 – 2150 (Satellite)
MHz 54 – 806 (Terrestrial & SMATV)
MHz 5 – 40 (Return Path) — CMTS return
path must use 33-40 MHz band
Each 6
Each 1
dBm -45 to -15 dBm per transponder
MHz 950 – 2150 (Satellite)
54 – 806 (Terrestrial & SMATV)
MHz 950 – 1800
Each 6 per SWM Module
Each 1 per SWM Module
dBm -31 dBm (min) per SWM channel
Each Powered from FMC-6 Chassis via
legacy 3 input port
qty 1
mm 167x145x35
kg 0.5
°C -34 to +52
The component shall survive
exposure to 95% relative humidity
over operating temperature range
Die-cast aluminum waterproof
housing suitable for indoor and
outdoor installation
Part #
217502
SWM-8