Table of Contents
Advertisement
Setup
Menu
Progressive
This feature is only valid if you have
connected this unit to a progressive
scan
TV through the component video jacks
(see "Component
video jacks <A>"
on
page 7).
1
In "VIDEO
SETUP PAGE", press A/V
to
highlight
[PROGRESSIVE],
and then
press
O___N_N
Select this to enable
the progressive
scan
function.
OFF
Select this to disable the progressive
scan
function.
2
Press A/Y
to select a setting, and then
press ENTER/OK
to confirm your
selection.
Notes
on activating
progressive
scan:
-
Ensure that your TV is equipped with
progressive
scan.
-
Connect
using a component
video
cable.
-
Ensure that "YUV/S" is set to "YUV"
(see "Switching
the YUV/S-video"
on
page 28).
-
When the progressive scan is active, the
VIDEO
(CVBS) and S VIDEO jacks do
not output video signals.
-
If no picture is displayed, wait for 15
seconds for this unit to activate
automatic
recovery,
or deactivate
progressive
scan manually as follows:
I
PressA (OPENICLOSE)
on the
front panel to open the disc tray.
2 Press 4.
CONSUMERS
SHOULD
NOTE THAT
NOT ALL
HIGH DEFINITION
TELEVISION SETS ARE FULLY
COMPATIBLE
WITH THIS PRODUCT
AND
MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 52.5 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT ISRECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE "STANDARD
DEFINITION"
OUTPUT.
IF
THERE ARE QUESTIONS
REGARDING
OUR
VIDEO
MONITOR
COMPATIBILITY
WITH THIS
MODEL 525P AND
B25P DVD PLAYER, PLEASE
CONTACT
OUR CUSTOMER SERVICE CENTER.
This unk is compatible
with the complete
line of
YAMAHA
products,
including the pl_)jectors
DPX
1200, LPX 510 and the plasma monitor
PDM 4220.
Picture
settings
This unit comes with three predefined
sets
of picture color settings and one personal
setting that you can defne
yourself.
1
In "VIDEO
SETUP PAGE", press A/_'
to
highlight (PICTURE SETTING],
and then
press 1_.
STANDARD
Select this for the standard picture setting.
BRIGHT
Select this to make the TV picture
brighter.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize
your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
2
Press A/V
to select a setting, and then
press ENTER/OK
to confirm your
selection.
3 Press ANGLE.
26
Advertisement
Table of Contents
