Rear Panel - Asus DVD-E616P1 User Manual

Rear Panel

7
7. Audio Output
This connector is for an analog audio output cable. This connector is
compatible with "Molex 70553".
Pin Name
1 L
2 & 3 G
4 R
8. Device Configuration Jumper
These pins allow you to select either Master, Slave, or Cable Select
mode for the DVD-ROM device. (Refer to page 12 for jumber settings.)
Pin Name
1 MA
2 SL
3 CS
4-5 Reserved
9. Host IDE Interface
This connector is for a 40-pin IDE cable to connect the drive to the IDE
interface on the motherboard.
10. DC Input
This DC connector is for a 4-pin power cable from the system power
supply.
ASUS DVD-E616P1 User Manual
8 9
Description
Left channel audio output
Ground
Right channel audio output
Switch Status Description
ON Master mode
ON Slave mode
ON Cable select mode
10
11