Dymo LabelWriter Duo 1739700 Quick Start Manual page 4

Your LabelWriter printer is a thermal printer and does not use toner or ink
cartridges. Instead, it uses heat from a thermal print head to print on specially
treated labels. Labels are the only supplies you will ever need to buy.
Become familiar with the printer's major components. See Figure 2.
DC power
connector
LabelWriter Printer Features
The form-feed button on the front of the printer is used to advance a single label.
The label eject button is used to remove labels from the printer when changing
rolls. The tape tray release button opens the tape tray to insert or remove a label
cassette.
The LED status light allows you to visually determine the current state of the
printer:
•
Solid blue - power is on and the printer is ready.
•
Flashing blue - labels are not loaded properly or label spool is empty.
2
Form-feed
button and LED
Tape tray
release button
USB
connector
Top
cover
Platen
release
Label feed path
and tear bar
Label exit
slot
Figure 2
Label roll
Label eject
button
Label
spool