Table of Contents
Advertisement
Shooting (
)
å
High resolution and picture quality increases ¿ le saving time,
which increases stand-by time.
å
If the [Continuous], [High-speed], [Motion Capture], [AEB] sub
menu is selected, the À ash will be off automatically.
å
If less than 3 pictures are available in the memory, the AEB
shooting is not available.
å
It is best to use a tripod for the AEB shooting as the time to save
each image ¿ le is longer and blurring caused by camera shake
may occur.
Setting AEB area
The ranges and intervals of three photos can be set during AEB shooting.
- Set a standard for the exposure bracket
by pressing the LEFT/RIGHT buttons.
- Set a range for the left and right exposure
bracket by using the Smart Dial.
056
Auto Focus type
You can select your preferred Focus Area according to the shooting
conditions.
[Center AF] (
[Multi AF] (
[Selection AF] (
[Tracking AF] (
Ä When the camera focuses on the subject, the auto focus frame
turns to green. When the camera doesn't focus on the subject, the
auto focus frame turns to red.
-2
-1
0
+1
+2
AEB Area
How to Enable Selection AF
After setting [Selection AF], press the OK
Back
Move
button and then the screen for setting the
location of a focus frame will appear.
Press the Up/Down/Left/Right button to
move the focus mark to the desired position.
Press the shutter button to enable Selection
AF. Once setting is complete, the focus mark
will be ¿ xed at the position set.
) : The rectangular area in the
center of the LCD monitor
will be focused
) : This camera selects all of
available AF point from the 9
AF points.
) : Focus on the desired position of the LCD monitor.
) : The focus moves along with the movements of a
subject.
Focus Area
Back
Move
Move
Set
Focus Mark
Advertisement
Table of Contents
