Lenovo 30113RU - IdeaCentre A600 - 3011 Quick Reference Manual page 2

Bluetooth configuration
To install the batteries, press the cover in
7
and lift up.
1
Press the cover in and lift up.
2
Close
8
Install the 3
batteries in the To proceed with the Bluetooth device configuration, do
battery compartment.
the following as prompted.
Note: If you experience a problem, verify
Select the Lenovo_RC icon from the Name channels in
the batteries are good, and they are
the Pair with wireless devices dialog box and click
correctly Installed. If not, the remote control
Next. Select Creat a pairing code for me and the
might not work or is possibly damaged.
password is 0000. The remote is now configured and
can be used.
3
9
The Remote Control initializes and is
now ready to be configured as follows.
4
In Windows, Click Start -> Control Panel to
open the control panel dialog box.
5
Select the Bluetooth icon in the dialog box
to add the remote device. Press Add
Bluetooth audio configuration.
to open the Bluetooth device guide dialog
box. All the configuration process needs to
1
be finished within 180 seconds. Select the
related option in the pop-up Bluetooth
device dialog box and click Next.
2
6
Press Play and Digit 1
3
at the same time over
10 seconds.
4
Important information about using the Remote Control
Be sure to use known, good alkaline batteries to ensure the remote works properly and to avoid damaging the Remote Control. Remove all batteries when you are not using the Remote Control for an extended period of time. Use the remote as shown below:
NOTE:
Bluetooth LED bright (solid): Indicates that the connection is estab-
lished between the remote control and the computer.
M LED bright (solid): Indicates that CD game is active and can be
manipulated by the remote control.
3D LED bright (solid): Indicates that joystick game is active and can
be manipulated by the remote control.
Game switch button: Use to switch to the 3 different game modes --
preinstalled game, joystick game, or to turn off the game. Switch to
the different modes by pressing the button.
The remote control is the standard MCE remote control for the
model configured with Windows MCE.
The Wireless Phone and Air Mouse keys need to be pressed more
than 1 second to turn on or turn off these functions. You need to
install related software to use the Wireless Phone.
You can use the air mouse similar with common mouse to move the
cursor.
Note: Make sure the front side of the remote control always towards
up.
Under the air mouse and game mode, the remote control will go into the
standby status, when the remote control is inactivate for 10-20 seconds.
Under the standby status, the Bluetooth will keep connecting and
When the Bluetooth LED indicator blinks twice con-
secutively at every second, and the remote control
makes beep sound, it indicates that the remote is
active and can be detected by the computer.
Bluetooth LED indicator will be on solid until
the successful completion of the Bluetooth
connection.
Don't press Play and Digit 1, after successful
connecting the Bluetooth.
Right click Lenovo_RC device and select
Property icon in the wireless device dialog box.
Select Headset icon from pop-up property
dialog box.
Right click Lenovo_RC device and select
Audio icon in the wireless device dialog box.
Click Connect icon if the Lenovo_RC audio
device is disconnection in Audio dialog box.
the indicator is light. You may move the remote control or press any
key to wake up the remote control and go back to the previous
mode.
Under wireless phone mode, the remote control will not go into the
standby status or sleep mode.
Under other mode, after the remote control going into the standby
status for 10 minutes and without waking it up. it will go into the
sleep mode. The Bluetooth will be disconnection and the indicator is
unlighted.
Press any key to wake up the remote control, but you have to wait
for several seconds to recover the Bluetooth connection.
You needn't to do the Bluetooth pairing again when it wakes up from
standby status or sleep mode.
When computer go into the standby status (S3), sleep mode (S4) or
turn off (S5), the remote control will go into the sleep mode auto-
matically and the Bluetooth will be disconnection. After waking up or
restarting the system, you may press any key on the remote control
to wake it up and finish the Bluetooth connection.
To save electric power of the battery, using the remote control
regularly.
When the remote control power indicator blinks every three seconds
To switch to the Game mode
Press Game button to switch the game
to the preinstalled game mode.
OK
When the M LED is on, this indicates
the game has been switched to the
OK
preinstalled game mode.
To start the game, place the Game CD in the
optical drive and follow the prompts by
installing and using the remote. For more
information about the game, see the Access
Help on the Game CD.
Too close to the computer.
0 -1 meter (0 – 3 feet)
Suggested range:
1 - 3 meters (3 -10 feet)
Too far from the computer.
Over 3 meters (over 10 feet)
The optimum distance between the remote and
computer is 1 - 3 meters (3 -10 feet).
interval, it indicates that the battery electric power is low and the
remote control will turn off automatically after 10 minutes.
The remote control cannot be used when the remote control power
indicator blinks three times in every second for three seconds and
with the beep sound at the same time. You need to change new
batteries to make it work.
Under Windows MCE mode:
MCE remote control works normally. You need press related button
to turn on the air mouse, game or wireless phone function.
Under Air Mouse mode:
MCE remote control and air mouse work normally. You need press
related button to turn on the game and wireless phone function.
Under Wireless Phone mode:
MCE remote control and wireless phone function work normally.
You need press related button to turn on the game and air mouse.
Under Game mode:
The Game function works normally. You need press related button
to turn on the air mouse, MCE remote control or wireless phone
function.
Air mouse
You can use the remote control as a regu-
lar mouse by using the air mouse.Under
the air mouse mode, all the functions of
remote control also can be used.
Air mouse buttons:
Record
Left air mouse
Rewind
button, Air mouse
Replay
On/Off button, Right
air mouse button.
When the air mouse
button is on, it indi-
cates the air mouse
is functional.
Press the air mouse On/Off button
Left air mouse/Game A
until the key indicates that the air
mouse can be used normally. Volume up/Game X
Using the air mouse is the same as
Volume down/Game
using a regular mouse.
throttle up
Turn on or turn off the Game mode, and switch all the games.
Turn on or turn off the Air Mouse mode.
Turn on or turn off the Wireless Phone mode.
Turn on the Windows Media Center
Be sure to hold the air mouse horizontally.
Note:
Do not use the air mouse in a slanted or
The direction key and OK key only can be used on Game mode, and they are useless
vertical position. on the Windows Media Center mode.
In the Joystick Game mode, the Volume up and Volume down keys only can execute
If you do, the result might not be your
Game X and Y, Throttle up and Throttle down functions.
intended selection.
30
The best angle to use the remote is 30°.
CAUTION
Be sure the remote control wrist
strap is adjusted tightly on your
wrist when using the remote
control. This will prevent possibly
hitting a bystander, or other
objects in the area where you are
using the remote control.
CAUTION
Be aware of both the
people and the objects
around you when you
use the remote.
CAUTION
To avoid hurting
someone or damaging
something, do not whirl
the remote control by
the wrist strap.
Headphone
LED indicator of Bluetooth
LED indicator of joystick game
LED indicator of CD game
Power
Game switch
Phone On/Off
Stop
Fast forward
Play or pause
Skip
Windows Media Center Start
Back
More
Direction
OK
Air mouse ON/OFF
Right air mouse/Game B
A B
Channel Up/Game Y
X Y
Mute
Channel down/Game throttle down
Guide
ABC DEF
Digit/Input sources
GHI JKL MNO
PQRS TUV WXYZ
* key * # key
＃
Clear Enter
Teletex On/Off (Select models only)
(Select models only )
Microphone
?
Be sure there are no obstructions between
the remote control and the computer.
CAUTION
Do not handle the
remote control if your
hand is wet or the
remote is wet.
You might receive an
electrical shock and or
damage the remote
control.
CAUTION
To avoid hurting
someone or
damaging something,
do not attempt to
throw the remote
control.
CAUTION
Keep a safe distance away from anyone using
the remote control.