Using The Alarm Clock; Setting The Alarm Timers; Setting The Alarm Mode (Wake To Radio, Cd, Or Buzzer) - Coby KCD150 - CD Player With AM/FM Radio Instruction Manual

Clock Mode

Using the Alarm Clock

Setting the Alarm Timers

Set one or two independent alarms to wake at different
times.
To set the Alarm 1 timer:
1. Make sure the unit has been turned off (the POWER
ON INDICATOR [4] should be dark).
2. Press AL 1 [12]. The AL1 INDICATOR [22] will light and
the display will flash the Alarm 1 time.
3. Press SKIP UP/HOUR [9] to adjust the hour; press SKIP
DOWN/MINUTE [10] to adjust the minutes.
4. Press AL 1 [12] again to save the Alarm 1 time. The
AL1 INDICATOR [22] will remain on; the unit will now
sound at the set time.
To set the Alarm 2 timer, follow all of the steps above, but
press AL 2 [16] instead of AL 1. When the Alarm 2 timer has
been set and is active, the AL2 INDICATOR [6] will light.
Setting the Alarm Mode (Wake to Radio, CD, or
Buzzer)
Set the FUNCTION SWITCH [27] to the "AM" or "FM"

position to wake to the radio. Turn the VOLUME
KNOB [2] to adjust the volume to the desired level.
Set the FUNCTION SWITCH [27] to the "CD" position

to wake to a CD. Turn the VOLUME KNOB [2] to adjust
the volume to the desired level.
www.cobyusa.com Page 15