Operating This Unit; Display Indication; Setup Menu; Basic Operations - Pioneer FH-X700BT Owner's Manual

Cd rds receiver
Hide thumbs Also See for FH-X700BT:
Table of Contents

Advertisement

Available languages

Available languages

Section

Operating this unit

02
Part
Operation
Press to start talking on the
k
phone while operating a
phone.
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
LIST/
l
Press to display the list de-
ENTER
pending on the source.
While in the operating menu,
press to control functions.

Display indication

1
5
6
7
9
4
8
Indicator
State
! Tuner: band and frequency
Main infor-
! CD player, USB storage de-
1
mation
vice and iPod: elapsed play-
section
back time and text
information
Appears when a lower tier of
2
folder or menu exists.
(auto
Shows when the automatic an-
3
answer)
swering function is on.
Shows when 12H is selected
4
under 12H/24H and CLOCK is
selected under INFO DISPLAY.
The list function is being oper-
5
(list)
ated.
4
En
Indicator
State
Sub infor-
6
mation
Sub information is displayed.
section
7
LOC
Local seek tuning is on.
The sound retriever function is
8
(sound re-
on.
triever)
Random play is on.
(ran-
The iPod source is selected
dom/shuf-
and the shuffle or shuffle all
9
fle/Quick-
function is on.
Mix)
The Pandora source is selected
and the QuickMix is selected.
2
(re-
3
a
Track or folder repeat is on.
peat)
(iPod
This unit's iPod function is op-
b
control)
erated from your iPod.
b
Connected to a Bluetooth de-
a c
c
(Bluetooth
vice.
indicator)
The line is on hold.
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO. Press to select.
If you select NO, you cannot set up in the set up
menu.
Operating this unit
3
Press M.C. to select.
4
Complete the procedure outlined below
to set the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
QUIT appears.
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO. Press to select.
6
Press M.C. to select.
Notes
! You can set up the menu options from the
system menu. For details about the settings,
refer to System menu on page 12.
! You can cancel set up menu by pressing
SRC/OFF.

Basic operations

Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns
off.
Selecting a source
1 Press SRC/OFF to cycle between:
TUNER (tuner)—CD (CD player)—USB (USB)/
iPod (iPod)—PANDORA (Pandora)—AUX
(AUX)—BT AUDIO (Bluetooth audio)
Adjusting the volume
1 Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when re-
moving the front panel.
Note
When this unit's blue/white lead is connected to
the vehicle's auto-antenna relay control termi-
nal, the vehicle's antenna extends when this
unit's source is turned on. To retract the anten-
na, turn the source off.
Use and care of the remote
control
Using the remote control
1 Point the remote control in the direction of the
front panel to operate.
When using for the first time, pull out the film
protruding from the tray.
Replacing the battery
1 Slide the tray out on the back of the remote
control.
2 Insert the battery with the plus (+) and minus
(–) poles aligned properly.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents