Operation - Duracraft DCM-200 Series Owner's Manual

035-00326-004_R1 DCM-200 OM
FILLING CONTINUED
NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE AND PLACE
YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.
• Place the Motor Housing back onto Base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If it has
to be moved, unplug the humidifier and remove the water tank first.
NOTE: DO NOT POUR WATER INTO THE GRILL ON THE TOP OF THE MOTOR HOUSING.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.

OPERATION

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRIC SHOCK COULD OCCUR.
P O W E R
• With the power switch in the OFF position, plug the filled humidifier into a polarized
120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one
way.
H U M I D I T Y C O N T R O L
1. Set the fan speed control to the desired position (Fig. 4).
HIGH: For fast humidifying
LOW: For quieter operation
NOTE: The length of time your humidifier runs will vary
depending on the quality of construction and insulation of your
room and house, as well as the fan speed.
2. Turn the humidifier OFF if the humidity level feels too moist or
you notice condensation forming on the walls and/or windows.
ALWAYS be sure to empty any unused water in the Base and/or Water Tank each time you
refill the water tank or finish using the humidifier.
5/11/04 10:51 AM Page 5
Fig. 4
High