Networking Basics; Check Your Ip Address; Windows Xp/000 Users; Windows 7/Windows Vista Users - D-Link DWA-525 User Manual

Wireless n150 desktop pci adapter

Hide thumbs Also See for DWA-525:

Table of Contents

Appendix B - Networking Basics

After you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings

should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the

steps below.

Windows

XP/2000 Users

• Click on Start > Run. In the run box, type cmd and click OK.

• At the prompt, type ipconfig and press Enter.

• This will display the IP address, subnet mask, and the default gateway of your

adapter.

Windows

7/Windows Vista

• Click Start > All Programs > Accessories > Command Prompt. You may need

administrative access to run this application.

• For all additional prompt windows inquiring of running the command prompt

application, select Yes, OK, or Continue.

• At the prompt, type ipconfig and press Enter.

• This will display the IP address, subnet mask, and default gateway of your adapter.

If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may

block a DHCP request on newly installed adapters.

D-Link DWA-55 User Manual

Networking Basics

Users

Table of Contents