Gigabyte GV-N59X128D User Manual page 7

4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully eated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
After installation, please connect the power cable to your
GV-N59X128D graphics card, or system will not boot.
To TV or VCR
To VGA Monitor
- 7 - Hardware Installation