Panasonic Lumix DMC-GF5 Owner's Manual page 159

[Touch Scroll]
[Menu Resume]
[Pixel Refresh]
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
•
Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
•
Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
[Shoot w/o Lens]
•
When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R: optional), set it to [ON].
Recording
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[ H ]: High speed
[ L ]: Low speed
Stores the location of the last-used menu item for each menu.
[ON]/[OFF]
It will perform optimization of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
(P195)
Sets whether or not the shutter can be released when no lens is
attached to the main body.
[ON]: Shutter will operate regardless of the lens on the unit.
[OFF]: You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
- 159 -