Importing Clips - JVC GY-HM700U - Prohd Compact Shoulder Solid State Camcorder User Manual

For MAC OS
Clip Operations (continue)

Importing Clips

This application does not recognize MP4 files that do not
contain the necessary file information. You can import these
MP4 files (unregistered clips) and register them as clips that
can be handled by this application.
1
Referring to Selecting Work Media and Work
Folders (A Page 30), select the media or folder
that contains the MP4 files to be imported
2
Do one of the following to select the MP4 files
to be imported
Select unregistered clips (MP4 files) in the List View
pane
● Select unregistered clips in the List View pane, and then
select [Import] from the [File] menu.
● The Import dialog opens with the selected clips already
entered in the import list.
6
● Proceed to step
.
Select unregistered clips in the Import dialog
● Select [Import] from the [File] menu.
● The Import dialog appears.
3
● Proceed to step
.
3
Click the [...] button to open a folder browsing
window and specify the MP4 file to import in that
window
● The specified file appears in the [Import origin] edit box.
Note ：
● Files over 4 GB in size cannot be imported.
4
Click the [Add] button to add the file to the list
5
Repeat steps 3 and 4 until you have selected all
the files you want to import
To delete a file from the list
Select the file to delete and click [Delete].
6
Click [shift] to start the import
● Before you start importing, check to make sure that the
import destination indicated in the dialog is correct.
● When the import finishes, the unregistered clips are
converted to normal clips.
● An
mark is displayed for imported clips. (A Page 28)
Reasons why an import operation may fail
File import operations may fail for the following reasons. In
these cases, an error message appears and the files are not
imported.
● You do not have delete/write privileges for the import
destination media or folder.
● The import destination media or folder is write protected.
Memo ：
● What are unregistered clips?
The file format supported by this application contains files
for managing the clip's registration information.
Unregistered clips are MP4 files that are not registered on
this file. Clips cannot be registered manually via other
means. Make sure that this is done using the import
feature of this application.
● How to display the unregistered clips in the List View
pane?
If a BPAV folder is found in the media or folder at the
import destination, and MP4 files are located in the CLPR
folder under the BPAV folder, a
the clip icon, and the clips can be displayed. If the clips
are located in a folder other than CLPR, they cannot be
listed.
Note ：
● The properties of import clips are set automatically.
● The timecode of import clips starts from 00:00:00:00.
● The import clips may not be playable on your device.
mark appears beside