AC adaptor (optional)/DC coupler (optional)
The AC Adaptor (optional) can only be used with the designated Panasonic DC
coupler (optional). The AC adaptor (optional) cannot be used by itself.
Preparations:
Turn the power switch to [OFF] and confirm that the lens barrel is retracted.
A Card/battery door
B DC coupler
C DC coupler cover
D AC adaptor
E AC cable
1
Pull open the card/battery door and the DC
coupler cover.
2
Insert the DC coupler into this unit.
•
Insert by pushing the center of the DC coupler.
•
Press on the DC coupler until it is locked by lever 1.
3
Pull out the cable through the opening as shown
in the illustration and then close the card/battery
door.
•
Be careful not to catch the cable when closing the card/
battery door.
4
Plug the AC adaptor into an electrical outlet.
5
Connect the AC adaptor to the [DC IN] socket of
the DC coupler.
Note
•
Always use a genuine Panasonic AC adaptor (optional).
•
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
•
If the AC adaptor and DC coupler are not necessary, then remove them from the digital
camera. Also, please keep the DC coupler cover closed.
•
Also read the operating instructions for the AC adaptor and DC coupler.
Others
- 166 -