[Soft Focus]; [Star Filter]; [One Point Color] - Panasonic Lumix DMC-FZ200 Owner's Manual

[Soft Focus]

[Star Filter]

[One Point Color]

∫
Set the color to leave in
Set the color to leave in by selecting a location on the screen.
1
Press function button to display the setting screen.
(DMC-FZ200) : [Fn3]
(DMC-FZ60) :
2
Put the center frame onto the color you want to leave,
and press [MENU/SET].
Note
•
Depending on the subject, the set color may not be left in.
This effect blurs the overall image to produce a soft feel.
Items that can be set
Extent of defocus
Note
•
Display of the recording screen will be delayed more than usual and the
screen will look as if frames are dropping.
This effect transforms pin-points of light into a star effect.
Items that can be set
Length of shine
Note
•
Display of the recording screen will be delayed more than usual and the
screen will look as if frames are dropping.
This effect leaves one selected color to emphasize impressiveness.
Items that can be set
Amount of color left Small amount of color
[Fn2]
Recording
Weak defocus
Short
- 122 -
Strong defocus
Long
Large amount of color