VTech Counting Time Measuring Tape User Manual page 6

2. Press the Tool Buttons to learn colors
and tools through fun sounds, phrases
and short tunes in Learning Mode. In
Music Mode, press the tool buttons
to hear fun sounds and melodies.
3. Pull the Measuring Tape to hear fun
sound effects, phrases and a song in
Learning Mode. In Music Mode, pull
the Measuring Tape to hear a fun
sound effect and a random melody.
The Measuring Tape features real
increments of measurement, so you can
measure things around the house!
4. Press the Light-up Button to hear funny
sounds and a sung song in both modes.
The light will flash with the sounds.
5. While a melody is playing, pull the Measuring Tape quickly to
increase the tempo of the melody. Pull the tape normally to jam fun
sound effects on the melody. Press the Tool Buttons to jam related
tool sounds on the melody. Press the Light-up Button to interrupt
the melody. The lights will flash with the sounds.
6. If there is no input after approximately 10 seconds, you will hear
fun sound effects and a phrase in Learning Mode and fun sounds
in Music Mode. If there is still no input about 10 seconds after that,
a song and a fun sound will play in both modes. If there is no input
for another 10 seconds, you will hear "Bye-bye" in both modes,
and the unit will go into sleep mode. The unit can be re-activated
by pressing any button.