Applications - Hitachi C10FSB - 10 Inch Sliding Dual Bevel Compound Miter Saw Safety & Instruction Manual

English
When cutting the workpiece which has the dimension of "*" there might be some possibility of the lower
end of the circular saw to touch with the workpiece, even if the motor head is located at the lower limit
position. Pay attention when cutting the workpiece. For further details, refer to "PRACTICAL APPLICATIONS"
on page 18. Mount the auxilliary board on the fence surface (Refer ( ) the thickness of auxiliary board).
Refer to "5. Cutting large workpieces" on page 20 (Fig. 29).

APPLICATIONS

Wood and aluminum sash.
10